In this paper, an online iterative learning planning method is proposed for industrial robot joint space manipulator to capture moving objects. The dynamic mathematical model of the robot is established, and the trajectory of the robot manipulator is tracked and adjusted through the path planning algorithm to change the visual impedance of the robot and optimize the system parameters. It makes the velocity direction of the end effector of the manipulator consistent with the tangent direction of the weld, and realizes the tracking and recognition of the weld trajectory at the end of the manipulator, so as to improve the accuracy and reliability of the robot in capturing moving objects. The simulation results show that the algorithm has good convergence and robustness.
Published in | Science Journal of Circuits, Systems and Signal Processing (Volume 10, Issue 1) |
DOI | 10.11648/j.cssp.20211001.12 |
Page(s) | 10-14 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2021. Published by Science Publishing Group |
Industrial Robots, Path Planning, Optimization
[1] | Wang Fei, Chao Zhiqiang, Zhang Chuanqing, Li Huaying. Simulation of variable mobility control of robot arm trajectory tracking [J]. Computer simulation 2018, 35 (12): 280-285. |
[2] | Chen Mei, Ding Minggang, Zheng Tao. Trajectory tracking control of multi robot system based on navigation following method [J]. Control engineering, 2019, 26 (01): 37-42. |
[3] | Huang Shuai, Fu Guangyuan, Wu Ming, Yue min. Multi mode filtering target tracking algorithm based on monocular suboptimal disparity in unknown environment [J]. Computer application 2019, 39 (03): 864-868. |
[4] | Zeng Xiangxin, Cui Naigang, Guo Jifeng. Path planning of space robot based on HP adaptive pseudospectral method [J]. Robot 2018, 40 (30): 385-392. |
[5] | Cao Qihe, Li Qinghua, Qiu Shubo, Han Fengjian, Feng Chao. Partition sampling strategy for robot motion planning under uncertainty [J]. The Journal of China Universities of Posts and Telecommunications, 2020, 12. |
[6] | Li Xueyong, Zhao Zhongqiu, Zhang Chunsong, Lu Changhou. Calculation method of human manipulator interaction force based on finite element method [J]. Journal of Jilin University (Engineering Edition), 2020, 23: 27-30. |
[7] | Yang Hongguo, Gu Lifen. Research on global path planning of agricultural robot based on Hybrid Particle Swarm Optimization [J]. Research on Agricultural Mechanization, 2021, 43 (10): 33-36. |
[8] | Zhang Yuanxun, Liu Yingbo, Gu Chengpeng, Du Xuesong, Huang Fan. Gait planning and analysis of six wheeled legged robot in unstructured environment under typical road conditions [J]. Mechanical science and technology, 2020, 12. |
[9] | Xu Mengying, Wang Jiaojiao, Liu Baoma, Liang Cailin, Jie Xiangli, Zhoujie. Gait planning and analysis of six wheeled legged robot in unstructured environment under typical road conditions [J]. Robot path planning based on Improved Genetic Algorithm. Journal of Shihezi University (NATURAL SCIENCE EDITION), 2020, 12. |
[10] | Yang Jing, Wang Qingyun, Liu Erwei, Zhang Zhuo. Trajectory planning and simulation analysis of 3R second lining cutting robot [J]. Southern agricultural machinery, 2020, 23: 17-22. |
[11] | Yao Gang. Research on trajectory planning of industrial robot handling operation [J]. Southern agricultural machinery, 2020, 23: 27-30. |
[12] | Zhang Qingsong, Duan Shuaichen, Xia Re. Workspace analysis and Simulation of humanoid manipulator based on MATLAB [J]. Mechanical drive, 2020, 12: 99-105. |
[13] | Yuan Quan, Lv Xunjie. Research on path planning optimization of mobile car based on PRM algorithm [J]. Journal of Ningbo Institute of Technology, 2020, 04: 31-35. |
[14] | Marco Manca, Fabio Paternò, Carmen Santoro, Eleonora Zedda, Chiara Braschi, Roberta Franco, Alessandro Sale. The impact of serious games with humanoid robots on mild cognitive impairment older adults [J]. International Journal of Human-Computer Studies, 2020, 12. |
[15] | Chen Gongxing. Research on robot electrical fault detection and diagnosis based on deep learning [J]. Automation and instrumentation, 2020, 35 (12): 40-44. |
APA Style
Gongxing Chen, Luxin Tang. (2021). Research on Space Motion Trajectory Optimization of the Industrial Robot. Science Journal of Circuits, Systems and Signal Processing, 10(1), 10-14. https://doi.org/10.11648/j.cssp.20211001.12
ACS Style
Gongxing Chen; Luxin Tang. Research on Space Motion Trajectory Optimization of the Industrial Robot. Sci. J. Circuits Syst. Signal Process. 2021, 10(1), 10-14. doi: 10.11648/j.cssp.20211001.12
AMA Style
Gongxing Chen, Luxin Tang. Research on Space Motion Trajectory Optimization of the Industrial Robot. Sci J Circuits Syst Signal Process. 2021;10(1):10-14. doi: 10.11648/j.cssp.20211001.12
@article{10.11648/j.cssp.20211001.12, author = {Gongxing Chen and Luxin Tang}, title = {Research on Space Motion Trajectory Optimization of the Industrial Robot}, journal = {Science Journal of Circuits, Systems and Signal Processing}, volume = {10}, number = {1}, pages = {10-14}, doi = {10.11648/j.cssp.20211001.12}, url = {https://doi.org/10.11648/j.cssp.20211001.12}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.cssp.20211001.12}, abstract = {In this paper, an online iterative learning planning method is proposed for industrial robot joint space manipulator to capture moving objects. The dynamic mathematical model of the robot is established, and the trajectory of the robot manipulator is tracked and adjusted through the path planning algorithm to change the visual impedance of the robot and optimize the system parameters. It makes the velocity direction of the end effector of the manipulator consistent with the tangent direction of the weld, and realizes the tracking and recognition of the weld trajectory at the end of the manipulator, so as to improve the accuracy and reliability of the robot in capturing moving objects. The simulation results show that the algorithm has good convergence and robustness.}, year = {2021} }
TY - JOUR T1 - Research on Space Motion Trajectory Optimization of the Industrial Robot AU - Gongxing Chen AU - Luxin Tang Y1 - 2021/04/16 PY - 2021 N1 - https://doi.org/10.11648/j.cssp.20211001.12 DO - 10.11648/j.cssp.20211001.12 T2 - Science Journal of Circuits, Systems and Signal Processing JF - Science Journal of Circuits, Systems and Signal Processing JO - Science Journal of Circuits, Systems and Signal Processing SP - 10 EP - 14 PB - Science Publishing Group SN - 2326-9073 UR - https://doi.org/10.11648/j.cssp.20211001.12 AB - In this paper, an online iterative learning planning method is proposed for industrial robot joint space manipulator to capture moving objects. The dynamic mathematical model of the robot is established, and the trajectory of the robot manipulator is tracked and adjusted through the path planning algorithm to change the visual impedance of the robot and optimize the system parameters. It makes the velocity direction of the end effector of the manipulator consistent with the tangent direction of the weld, and realizes the tracking and recognition of the weld trajectory at the end of the manipulator, so as to improve the accuracy and reliability of the robot in capturing moving objects. The simulation results show that the algorithm has good convergence and robustness. VL - 10 IS - 1 ER -