Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field

Wang Haichuan; Liao Zhiyou; Wang Bowen; Wu Ting; Lv Ningning; Deng Aijun; Wu Liushun

doi:doi:10.11648/j.jenr.20211002.11

| Peer-Reviewed

Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field

Wang Haichuan, Liao Zhiyou, Wang Bowen, Wu Ting, Lv Ningning, Deng Aijun, Wu Liushun

Published in Journal of Energy and Natural Resources (Volume 10, Issue 2)

Received: 15 February 2021 Published: 16 April 2021

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Based on the demand of the development of circular economy, the utilization of metallurgical solid waste has attracted more and more attention, one of the main ways of comprehensive utilization of metallurgical slag is internal recycling in steel plant to replace limestone as smelting flux, so it need to removal of phosphorus and sulfur from molten slag to decrease the burden of dephosphorization and desulfurization in the steelmaking process. In this paper, the current recycling situation of phosphorus-containing steel slag and sulfur-containing waste refining slag is briefly summarized, these relevant researches show that, the methods of dephosphorization of steel slag include reduction method (such as carbon reduction method or silicon reduction method) and gasification method, the dephosphorization ratio with reduction method reached 95.5%, and the greatest dephosphorization rate with gasification method can reach 81.23%, these treatment methods need a long time and treatment temperature is too high. Two main methods to remove sulfur from refining slag, oxidation method and hydrothermal method, oxidative roasting desulfurization and the sulfur removal rate was about 95%. And the latest research progress of using electric field to strengthen slag-metal reaction and component migration in metallurgical melt is also summarized. Electric field treatment of metallurgical melts can affect the physicochemical properties, such as viscosity, solidification structure, grain refinement, material properties, partition coefficient of component and the activity of solute, etc. It can enhances mass transfer reaction in metallurgical process and make oxygen transfer between molten iron and molten copper increase 2~3 times. It also can enhanced the migration ability of components between molten slag and metal, it is a great significance for electric field strengthening slag desulfurization because of enough sulfur ions in slag. There is a non-equilibrium phosphorus capacity different from conventional thermodynamic properties under the action of electric field, the lower non-equilibrium phosphorus capacity improves the phosphorus removal efficiency of phosphorus-containing steel slag.

Published in	Journal of Energy and Natural Resources (Volume 10, Issue 2)
DOI	10.11648/j.jenr.20211002.11
Page(s)	39-45
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2021. Published by Science Publishing Group

Keywords

Metallurgical Melt, Component Migration, Slag-Metal Reaction, Electric Field

References

[1]	Wen Liangying, Chen Dengfu, Bai Chenguang, Dong Lingyan, Xu Yuan, Qiu Guibao, Zhou Yuanhua, Liao Ming, Chen Hao, A Study of Premelted refining slag for ladle furnace (LF) [J], Special Steel, 2003, 24 (2), pp. 13-15. (in Chinese).
[2]	Kajioka Hiromiyuki, Translated by Li Hong, Ladle Refining [M], Beijing: Metallurgical Industry Press, 2002. (in Chinese).
[3]	Lu Xionggang, Electrochemical Control of Slag-metal Reaction [M], Beijing: Higher Education Press, 2001. (in Chinese).
[4]	Liu Hanghang, Research on Theory and Method of LF Refining Slag Desulfurization [J], Shandong metallurgy, 2014, 36 (2), pp. 46-49. (in Chinese).
[5]	Yoshio Shimotsuke, Akira Yanagiida, Kenzo Yamada, et al. Treatment method of Molten Steel Slag [P], Japanese Patent: Special Edition 51-121030, 1975.
[6]	Li Guangqiang, Zhang Feng, Zhang Li, Sui Zhitong, Recycle of converter slag by high temperature carbon thermal reduction [J]. Journal of Materials And Metallurgy, 2003, 29 (3), pp. 167-172. (in Chinese).
[7]	Nagata Kazuhiro. Vaporization dephosphorization of slag with Calcium sulphate [A], Reduction and Resource Utilization of Steel Slag [C]. Japan Iron and Steel Association, 1997, pp. 49-56.
[8]	Wang Shuhuan, Wu Yanqing, Liu Xinsheng, Experimental Study on Gasification Dephosphorization of Converter Slag With Reduction by Silicon [J]. Iron and steel, 2008, 43 (2), pp. 31-34. (in Chinese).
[9]	Gu Jiemei. Research on Desulfurization of metallurgical sulfur-containing slag by oxidative roasting [D]. Shenyang: Northeast University, 2011. (in Chinese).
[10]	Hiraki T, Kobayashi J, Urushibata S, Kazuyo Matsubae & Tetsuya Nagasaka. Removal of sulfur from CaF₂ containing desulfurization slag exhausted from secondary steelmaking process by oxidation [J]. Metallurgical and Materials Transactions B, 2012, 43 (4), pp. 703-709.
[11]	Wang Deyong; Wu Yonglai; Jiang Maofa; Liu Chengjun; Yang Zhenghong; Huang Zhenqiu, the utilization method of waste refining slag containing sulfur for refining slag, Chinese patent, CN200910264646. X, 2009.
[12]	Lin Lu, Bao Yanping, Wang Min, Wu Qifan, Zhao Lihua, Li Xiang, Gu Chao, A process for desulfurization and metallurgical internal recycling of LF refining slag [P], Chinese patent, CN201410360962.8, 2014.
[13]	Zhou Jian'an, Li Shu, Wang Bao, A desulfurization treatment method of metallurgical waste refining slag, Chinese patent, CN201910699218.3, 2019.
[14]	He Huanyu, Zeng Zhaozhi, Liu Jigang, Xu Bin, Cheng Rijin. Mechanism of sulfur removal from LF slag by hydrothermal leaching [J]. Journal of Wuhan University of science and technology, 2010, 33 (1), pp. 6-9. (in Chinese).
[15]	He Huanyu, Wang Jieqi, Chen Zhenhong, Song Zeyu, Physicochemical properties of LF refining spent slag after hydrothermal leaching, Journal of Wuhan University of Science and Technology, 2016, 39 (1), pp. 7-11.
[16]	He Huanyu, Ni Hongwei, Liu Jigang, Xia Xiaoliang, Wu Danjiang. Effect of subcritical water on spent slag regeneration desulfurization [J]. Journal of process engineering, 2009, 9 (1): pp. 230-232. (in Chinese).
[17]	Asai S, Effect of electric and magnetic force on solidified structure [J], Trans ISIJ, 1978, vol. 18, pp. 754-760.
[18]	Misra A K, A novel Solidification technique of metals and alloys: under the influence of applied potential [J], Metall Trans. A, 1985, vol. 16A, pp. 1354-1355.
[19]	Crossley F A, Fisher R D, Metcalfe A G. Viscous shear as an agent for grain refinement in cast metal [J], Trans Metall Soc AIME, 1961, vol. 221, pp. 419-420.
[20]	Zhou Quan, Yang Yuansheng, Grain refinement of aluminum by low-voltage electric pulse discharge [J], Hot Working Technology, 2006, 35 (1), pp. 16-18. (in Chinese).
[21]	Li Wanfeng, Yang Yuansheng, Yu Li, Zhang Yun, Hu Zhuanglin, Effect of DC electric field on the microstructure of nickel base superalloy K417g [J], Journal of Materials Engineering, 2001, (9), pp. 7-9. (in Chinese).
[22]	Wang Jianzhong, Cang Daqiang, pulse inoculation of liquid metal [P], Chinese Patent: CN98100543.8, 1998.
[23]	Tang Yong, Wang Jianzhong, Cang Daqiang, Effect of Pulse Electric Discharging on Solidification Structure of High Carbon Steel [J], Journal of iron and steel research, 1999, 11 (4), pp. 44-47. (in Chinese).
[24]	Tang Yong, Wang Jianzhong, Cang Daqiang, Wang Jingsong, Zhao Yuxiang, Improvement of T8 steel solidification structure by electricpulse treatment [J], Journal of University of science and technology Beijing, 2000, 22 (4), pp. 307-311. (in Chinese).
[25]	A. Rousu, O. Mattila and P. Tanskanen, A Labratory Investigation of the Influence of Electric Current on the Burden Reactions in A Submerged Arc Furnace [C], The 12th Int. Ferroalloys Congress, Helsinki, Finland, 2010, pp. 303-310.
[26]	Zhang Zhenbin, Wang Jianzhong, Qi Jingang, Wang Bing, he Lijia, Cang Daqiang, Effect of pulsed electric field on activity of Al-10% Cu melt [J], Journal of materials science and engineering, 2008, 26 (4), pp. 647-650. (in Chinese).
[27]	Wang Jingsong, Xue Qingguo, Shi Xiangdong, fan Fangguo, Xu Jianguo, Cang Daqiang, effect of electric pulse treatment on dendrite morphology in solidification structure of Sn-15% Pb alloy [J], Journal of Beijing University of science and technology, 2005, 27 (2), pp. 193-196. (in Chinese).
[28]	Li Dasheng, Fan Zhikang, Effects of Chromium and Electrical Field on Wettability between Copper and Tungsten [J], Rare Metal Materials and Engineering, 2007, 36 (6), pp. 1008-1011. (in Chinese).
[29]	Sun Deguo, Investigation of electrical field and elements (Fe and Co) on the wettability of copper and tungsten [D], Master's thesis of Xi'an Jiaotong University, 2008. (in Chinese).
[30]	Ban Chunyan, Fundamental study on solidification of Al alloy under electromagnetic fields [D], Doctoral Dissertation of Northeast University, 2002. (in Chinese).
[31]	Liu Bing, Chen Zheng, Influence of electric field and of Al-Li alloy containing Cerium and its electric mechanism [J], Journal of Chinese Rare Earth Society, 2001, 19 (1), pp. 58-61. (in Chinese).
[32]	Wei Zhiwen, Basic research on properties of molten mold flux under electric field [D], Master's thesis of Chongqing University, 2010. (in Chinese).
[33]	Kensuke OKAZAWA, Masahiro YAMANE and Yuka FUKUDA, Viscosity Change of Molten Oxides by Electric Current Imposition [J], Tetsu to Hagane, 2003, 86 (6), pp. 629-636.
[34]	Wang Yu, Wang Yanhui, Zeng Xiaolan, Liang Xiaoping, Wei Zhiwen, Crystallization properties of mould fluxes under electric field [J], Journal of Iron and Steel Research, 2012, 24 (5), pp. 10-13. (in Chinese).
[35]	Fang Liwu, Hong Xin, Li Changrong, Chen Hua, A study on setting behavior of copper drops in copper slag under electric field [J], Shanghai Metals, 2006, 28 (6), pp. 28-31. (in Chinese).
[36]	A. Warozok, T. A. Utigtud. Setting of copper drops in molten slags [J], Metall. and Mat. B: Process Metall. Mater. Pro. Sci.. 1995, 26 (6), pp. 1165-1173.
[37]	R. T. C. Choo, J. M. Toguri, The electrodynamic behavior of metal and metal sulphide droplets in slags [J], Can. Metal Q., 1992, 31 (2), pp. 113-117.
[38]	Li Qiuju, Chen Peng, Lin Jiangduo, Mao Jiajun, Behavior of Cu droplets migration in FeO-rich molten slag under electric field [J], Journal of Materials and Metallurgy, 2010, 9 (1), pp. 28-30. (in Chinese).
[39]	Bai Houshan, Jin Zhenn, Lang Xiaozhen, He Jiaqi, DC dilution of copper smelting slag [C], Proceedings of 2002 National Symposium on copper smelting production technology and product application, China Nonferrous Metals Society, 2002, pp. 40-45. (in Chinese).
[40]	Li Changrong, Jiang Mingli, Micro-examination of Copper Droplet Electro-capillary Migration in the Copper Smelting Slag [J], Modern Mining, 2011, (2), pp. 44-46. (in Chinese).
[41]	Lu Xionggang, Li Fusang, Hu Xiaojun, Li Lifen, Zhou Guozhi, Electrochemical mechanism of reaction between Fe-C melt and slag [J], Engineering Chemistry & Metallurgy, 1999, 20 (3), pp. 278-282. (in Chinese).
[42]	Lu XiongGang, Li FuShen, Li LiFen, Zhou GuoZhi, Effect of applied voltage and electrode on reaction between melt and slags [J], Engineering Chemistry & Metallurgy, 1999, 20 (04), pp. 402-404. (in Chinese).
[43]	Lu xionggang, Study on electrochemical mechanism of decarbonization of steel slag [D], Doctoral Dissertation of Beijing University of science and technology, 1998. (in Chinese).
[44]	Zhang Jieyu, Xu Jifang, Wang Bo, LU Xionggang, Zhou Guozhi, Li Qian, LI Jianchao, Chai Na, deoxidation refining method and device without pollution by external electric field in ladle furnace [P], Chinese patent, patent No. 200810034135, 2008.
[45]	Li Jianchao, Zhang Jieyu, Lu Xionggang, Zhou Guozhi, Zhou Weiguang, Liang Xinteng, Unpolluted Deoxidization of Molten Steel with Applied DC Voltage between Metal and Slag [J], The Chinese Journal of Process Engineering, 2006, 6 (S1), pp. 30-34. (in Chinese).
[46]	Lu xionggang, Liang Xiaowei, Yuan Wei, sun Mingshan, Ding Weizhong, Zhou Guozhi, study on unpollution deoxidation method with applied voltage between metal and slag [J], Acta metallurgica Sinica, 2005, 41 (2), pp. 113-117. (in Chinese).
[47]	Posch W, Preblinger H, Mary M, et al. Sulphur Bonding in Solidified Ladle Slags [C], VII International Conference on Molten Slags Fluxes and Slats．The South Afrian Institute of Mining and Metallurgy, 2004, pp. 249-254.
[48]	Wang Haichuan, Zhang Wangsheng, Liao Zhiyou, min Changjie, Wang Shijun, Dong Yuanchi, Effect of pulse electric field on the solidification microstructure and element distribution of carbon steel [J], Journal of University of science and technology Beijing, 2007, 39 (8), pp. 793-797. (in Chinese).
[49]	Wang Haichuan, Hong Peng, Liao Zhiyou, Li Xin, Li Jie, Wang Gui, Wang Shijun, and Matthew S. Dargusch, Effect of Pulsed Current on the Microstructure and Distribution of C and Mn in an Fe-0.5C-1.5Mn Alloy [J], Adv. Mat. Res., 2011, vol. 146-147, pp. 1612-1616.
[50]	Liao Zhiyou, Wang Haichuan, Hong Peng, Li Xin, Li Jie, Wang Shijun, Wang Gui, and Matthew S. Dargusch. Effect of Pulsed Electric Field on the Distribution and Migration of P, S, and Si Elements of Fe-based Alloys [J], Adv. Mat. Res., 2011, vol. 194-196, pp. 371-374.
[51]	Hong Peng, Wang Haichuan, Li Xin, Li Jie, Liao Zhiyou, Qian Zhangxiu, Effect of pulsed electric field on solidification process of Fe-C-P system alloy [J], The Chinese Journal of Process Engineering, 2011, 11 (1), pp. 28-33. (in Chinese).
[52]	Liao Zhiyou, Wang Haichuan, Peng Hong, Xin LI, Shijun Wang, Jie Li. Research on Effect of Pulse Electric Field on Solidification Process of Fe-C-S Alloy Melt [J], Adv. Mat. Res., 2011, vol. 284-286, pp. 1137-1142.
[53]	Chen Kequan, effect of pulsed electric field on migration characteristics of impurities and alloying elements between slag and metal [D], Master's thesis of Anhui University of Technology, 2013. (in Chinese).

Cite This Article

Plain Text BibTeX RIS

APA Style

Wang Haichuan, Liao Zhiyou, Wang Bowen, Wu Ting, Lv Ningning, et al. (2021). Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field. Journal of Energy and Natural Resources, 10(2), 39-45. https://doi.org/10.11648/j.jenr.20211002.11

Copy | Download

ACS Style

Wang Haichuan; Liao Zhiyou; Wang Bowen; Wu Ting; Lv Ningning, et al. Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field. J. Energy Nat. Resour. 2021, 10(2), 39-45. doi: 10.11648/j.jenr.20211002.11

Copy | Download

AMA Style

Wang Haichuan, Liao Zhiyou, Wang Bowen, Wu Ting, Lv Ningning, et al. Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field. J Energy Nat Resour. 2021;10(2):39-45. doi: 10.11648/j.jenr.20211002.11

Copy | Download

@article{10.11648/j.jenr.20211002.11,
  author = {Wang Haichuan and Liao Zhiyou and Wang Bowen and Wu Ting and Lv Ningning and Deng Aijun and Wu Liushun},
  title = {Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field},
  journal = {Journal of Energy and Natural Resources},
  volume = {10},
  number = {2},
  pages = {39-45},
  doi = {10.11648/j.jenr.20211002.11},
  url = {https://doi.org/10.11648/j.jenr.20211002.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20211002.11},
  abstract = {Based on the demand of the development of circular economy, the utilization of metallurgical solid waste has attracted more and more attention, one of the main ways of comprehensive utilization of metallurgical slag is internal recycling in steel plant to replace limestone as smelting flux, so it need to removal of phosphorus and sulfur from molten slag to decrease the burden of dephosphorization and desulfurization in the steelmaking process. In this paper, the current recycling situation of phosphorus-containing steel slag and sulfur-containing waste refining slag is briefly summarized, these relevant researches show that, the methods of dephosphorization of steel slag include reduction method (such as carbon reduction method or silicon reduction method) and gasification method, the dephosphorization ratio with reduction method reached 95.5%, and the greatest dephosphorization rate with gasification method can reach 81.23%, these treatment methods need a long time and treatment temperature is too high. Two main methods to remove sulfur from refining slag, oxidation method and hydrothermal method, oxidative roasting desulfurization and the sulfur removal rate was about 95%. And the latest research progress of using electric field to strengthen slag-metal reaction and component migration in metallurgical melt is also summarized. Electric field treatment of metallurgical melts can affect the physicochemical properties, such as viscosity, solidification structure, grain refinement, material properties, partition coefficient of component and the activity of solute, etc. It can enhances mass transfer reaction in metallurgical process and make oxygen transfer between molten iron and molten copper increase 2~3 times. It also can enhanced the migration ability of components between molten slag and metal, it is a great significance for electric field strengthening slag desulfurization because of enough sulfur ions in slag. There is a non-equilibrium phosphorus capacity different from conventional thermodynamic properties under the action of electric field, the lower non-equilibrium phosphorus capacity improves the phosphorus removal efficiency of phosphorus-containing steel slag.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field
AU  - Wang Haichuan
AU  - Liao Zhiyou
AU  - Wang Bowen
AU  - Wu Ting
AU  - Lv Ningning
AU  - Deng Aijun
AU  - Wu Liushun
Y1  - 2021/04/16
PY  - 2021
N1  - https://doi.org/10.11648/j.jenr.20211002.11
DO  - 10.11648/j.jenr.20211002.11
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 39
EP  - 45
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20211002.11
AB  - Based on the demand of the development of circular economy, the utilization of metallurgical solid waste has attracted more and more attention, one of the main ways of comprehensive utilization of metallurgical slag is internal recycling in steel plant to replace limestone as smelting flux, so it need to removal of phosphorus and sulfur from molten slag to decrease the burden of dephosphorization and desulfurization in the steelmaking process. In this paper, the current recycling situation of phosphorus-containing steel slag and sulfur-containing waste refining slag is briefly summarized, these relevant researches show that, the methods of dephosphorization of steel slag include reduction method (such as carbon reduction method or silicon reduction method) and gasification method, the dephosphorization ratio with reduction method reached 95.5%, and the greatest dephosphorization rate with gasification method can reach 81.23%, these treatment methods need a long time and treatment temperature is too high. Two main methods to remove sulfur from refining slag, oxidation method and hydrothermal method, oxidative roasting desulfurization and the sulfur removal rate was about 95%. And the latest research progress of using electric field to strengthen slag-metal reaction and component migration in metallurgical melt is also summarized. Electric field treatment of metallurgical melts can affect the physicochemical properties, such as viscosity, solidification structure, grain refinement, material properties, partition coefficient of component and the activity of solute, etc. It can enhances mass transfer reaction in metallurgical process and make oxygen transfer between molten iron and molten copper increase 2~3 times. It also can enhanced the migration ability of components between molten slag and metal, it is a great significance for electric field strengthening slag desulfurization because of enough sulfur ions in slag. There is a non-equilibrium phosphorus capacity different from conventional thermodynamic properties under the action of electric field, the lower non-equilibrium phosphorus capacity improves the phosphorus removal efficiency of phosphorus-containing steel slag.
VL  - 10
IS  - 2
ER  -

Copy | Download

Author Information

Wang Haichuan

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
Liao Zhiyou

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
Wang Bowen

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
Wu Ting

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
Lv Ningning

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
Deng Aijun

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China
Wu Liushun

School of Metallurgical Engineering, Anhui University of Technology, Ma’anshan, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Wang Haichuan, Liao Zhiyou, Wang Bowen, Wu Ting, Lv Ningning, et al. (2021). Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field. Journal of Energy and Natural Resources, 10(2), 39-45. https://doi.org/10.11648/j.jenr.20211002.11

Copy | Download

ACS Style

Wang Haichuan; Liao Zhiyou; Wang Bowen; Wu Ting; Lv Ningning, et al. Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field. J. Energy Nat. Resour. 2021, 10(2), 39-45. doi: 10.11648/j.jenr.20211002.11

Copy | Download

AMA Style

Wang Haichuan, Liao Zhiyou, Wang Bowen, Wu Ting, Lv Ningning, et al. Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field. J Energy Nat Resour. 2021;10(2):39-45. doi: 10.11648/j.jenr.20211002.11

Copy | Download

@article{10.11648/j.jenr.20211002.11,
  author = {Wang Haichuan and Liao Zhiyou and Wang Bowen and Wu Ting and Lv Ningning and Deng Aijun and Wu Liushun},
  title = {Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field},
  journal = {Journal of Energy and Natural Resources},
  volume = {10},
  number = {2},
  pages = {39-45},
  doi = {10.11648/j.jenr.20211002.11},
  url = {https://doi.org/10.11648/j.jenr.20211002.11},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.jenr.20211002.11},
  abstract = {Based on the demand of the development of circular economy, the utilization of metallurgical solid waste has attracted more and more attention, one of the main ways of comprehensive utilization of metallurgical slag is internal recycling in steel plant to replace limestone as smelting flux, so it need to removal of phosphorus and sulfur from molten slag to decrease the burden of dephosphorization and desulfurization in the steelmaking process. In this paper, the current recycling situation of phosphorus-containing steel slag and sulfur-containing waste refining slag is briefly summarized, these relevant researches show that, the methods of dephosphorization of steel slag include reduction method (such as carbon reduction method or silicon reduction method) and gasification method, the dephosphorization ratio with reduction method reached 95.5%, and the greatest dephosphorization rate with gasification method can reach 81.23%, these treatment methods need a long time and treatment temperature is too high. Two main methods to remove sulfur from refining slag, oxidation method and hydrothermal method, oxidative roasting desulfurization and the sulfur removal rate was about 95%. And the latest research progress of using electric field to strengthen slag-metal reaction and component migration in metallurgical melt is also summarized. Electric field treatment of metallurgical melts can affect the physicochemical properties, such as viscosity, solidification structure, grain refinement, material properties, partition coefficient of component and the activity of solute, etc. It can enhances mass transfer reaction in metallurgical process and make oxygen transfer between molten iron and molten copper increase 2~3 times. It also can enhanced the migration ability of components between molten slag and metal, it is a great significance for electric field strengthening slag desulfurization because of enough sulfur ions in slag. There is a non-equilibrium phosphorus capacity different from conventional thermodynamic properties under the action of electric field, the lower non-equilibrium phosphorus capacity improves the phosphorus removal efficiency of phosphorus-containing steel slag.},
 year = {2021}
}

Copy | Download

TY  - JOUR
T1  - Research Progress of Impurity Removal from Metallurgical Slag and Strengthening Metallurgical Process by External Electric Field
AU  - Wang Haichuan
AU  - Liao Zhiyou
AU  - Wang Bowen
AU  - Wu Ting
AU  - Lv Ningning
AU  - Deng Aijun
AU  - Wu Liushun
Y1  - 2021/04/16
PY  - 2021
N1  - https://doi.org/10.11648/j.jenr.20211002.11
DO  - 10.11648/j.jenr.20211002.11
T2  - Journal of Energy and Natural Resources
JF  - Journal of Energy and Natural Resources
JO  - Journal of Energy and Natural Resources
SP  - 39
EP  - 45
PB  - Science Publishing Group
SN  - 2330-7404
UR  - https://doi.org/10.11648/j.jenr.20211002.11
AB  - Based on the demand of the development of circular economy, the utilization of metallurgical solid waste has attracted more and more attention, one of the main ways of comprehensive utilization of metallurgical slag is internal recycling in steel plant to replace limestone as smelting flux, so it need to removal of phosphorus and sulfur from molten slag to decrease the burden of dephosphorization and desulfurization in the steelmaking process. In this paper, the current recycling situation of phosphorus-containing steel slag and sulfur-containing waste refining slag is briefly summarized, these relevant researches show that, the methods of dephosphorization of steel slag include reduction method (such as carbon reduction method or silicon reduction method) and gasification method, the dephosphorization ratio with reduction method reached 95.5%, and the greatest dephosphorization rate with gasification method can reach 81.23%, these treatment methods need a long time and treatment temperature is too high. Two main methods to remove sulfur from refining slag, oxidation method and hydrothermal method, oxidative roasting desulfurization and the sulfur removal rate was about 95%. And the latest research progress of using electric field to strengthen slag-metal reaction and component migration in metallurgical melt is also summarized. Electric field treatment of metallurgical melts can affect the physicochemical properties, such as viscosity, solidification structure, grain refinement, material properties, partition coefficient of component and the activity of solute, etc. It can enhances mass transfer reaction in metallurgical process and make oxygen transfer between molten iron and molten copper increase 2~3 times. It also can enhanced the migration ability of components between molten slag and metal, it is a great significance for electric field strengthening slag desulfurization because of enough sulfur ions in slag. There is a non-equilibrium phosphorus capacity different from conventional thermodynamic properties under the action of electric field, the lower non-equilibrium phosphorus capacity improves the phosphorus removal efficiency of phosphorus-containing steel slag.
VL  - 10
IS  - 2
ER  -

Copy | Download