Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process

Chen Hong; He Yong; Pan Xuchao; Shen Jie; He Xun

doi:doi:10.11648/j.sd.20160406.19

| Peer-Reviewed

Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process

Chen Hong, He Yong, Pan Xuchao, Shen Jie, He Xun

Published in Science Discovery (Volume 4, Issue 6)

Received: 6 December 2016 Published: 7 December 2016

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Explosions of explosives can produce electromagnetic radiation signals. Based on the theory of the explosion of electromagnetic radiation, the effects of metal additives on the electromagnetic radiation produced by explosive detonation should be researched. In this paper, the electromagnetic radiation signal characteristic produced by the passivation RDX of metal additives explosion were studied by experimental. The rod-shaped antenna measurement system was used to measure the electromagnetic radiation signals generated by the different percentages of aluminum-containing passivation RDX and pure passivation RDX. The results show that the intensity of the electromagnetic radiation signal produced by the explosion is obviously increased by mixing aluminum. In the case of the same explosive mass, the signal intensity of the electromagnetic radiation generated by the explosion increases with the aluminum mass percentage is increased. When the content of aluminum is the same，with the increase of the mass of explosives，the intensity of the electromagnetic radiation signal generated by explosion also increases. The main component of the electromagnetic radiation signal frequency generated by explosives is less than 1MHz，the electromagnetic spectrum generated by explosives with the same composition is consistent.

Published in	Science Discovery (Volume 4, Issue 6)
DOI	10.11648/j.sd.20160406.19
Page(s)	398-404
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2016. Published by Science Publishing Group

Keywords

Explosives Addition of Aluminum, Detonation, Electromagnetic Radiation, Measurement, Spectrum Analysis

References

[1]	Takakura T. Radio Noise Radiated on the Detonation of Explosive [J]. Publications- Astronomical Society of Japan, 1955, 7.
[2]	Andersen W H, Long C L. Electromagnetic Radiation from Detonating Solid Explosives [J]. Journal of Applied Physics, 1965, 36 (4): 1494-1495.
[3]	Cherepenin V A，Cherepenin V A, Shumilin V P. About Mechanism of Wideband Microwave Radiation at Explosion of Condensed High Explosives [M]. Ultra-Wideband Short-Pulse Electromagnetics Springer US, 2002:33–39。
[4]	Van Lint V A J. Electromagnetic Emission from Chemical Explosions [J]. Nuclear Science IEEE Transactions on, 1982, 29(6):1843-1849.
[5]	Mende F. Electrodynamics and thermodynamics of nuclear explosions and TNT [M]. LAP LAMBERT Academic Publishing, 2014.
[6]	Sergeev I Y. Theoretical model of the electromagnetic disturbances caused by explosions in the ionosphere [C]// Electromagnetics in Advanced Applications, 2009. ICEAA. International Conference on. IEEE, 2009:93-96.
[7]	Kuhl A L, White D A, Kirkendall B A. Electromagnetic Waves from TNT Explosions [J]. Journal of Electromagnetic Analysis & Applications, 2014, 6 (10): 280-295.
[8]	陈生玉，孙新利，钱世平，等.化爆引起的电磁辐射[J].爆炸与冲击，1997(4):363-368。
[9]	曹景阳，谢树果，苏东林,等.航天火工品爆炸引起的电磁干扰测量[J].北京航空航天大学学报，2011，37(11):1384-1387。
[10]	Ma Z, Xie S, Cao J. Application of Wavelet Transform to Process Electromagnetic Pulses from Explosion of Flexible Linear Shaped Charge [C]// International Conference on Computer and Electrical Engineering. 2012.
[11]	戴晴，李传胪，陈国强，等.低温等离子体激励宽带电磁波信号的实验研究[J].电子信息对抗技术,2009,24(5):72-74。
[12]	王长利，李迅，刘晓新，等.典型炸药爆炸过程的电磁辐射实验研究[J].兵工学报,2014(S2)：188-192。
[13]	Kuhl A L, Bell J B, Beckner V E, et al. Spherical combustion clouds in explosions [J]. Shock Waves, 2013, 23 (3): 233-249.
[14]	Kuhl A L, Balakrishman K, Bell J B. Ionization Effects in SDF Combustion Clouds [J]. 2012.
[15]	陈朗，赵玉华.含铝炸药爆轰数值模拟研究[J].北京理工大学学报,2001,21(4):415-419.
[16]	奥尔连科.爆炸物理学下册[M].孙承纬，北京：科学出版社,2011：1080-1115。

Cite This Article

Plain Text BibTeX RIS

APA Style

Chen Hong, He Yong, Pan Xuchao, Shen Jie, He Xun. (2016). Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process. Science Discovery, 4(6), 398-404. https://doi.org/10.11648/j.sd.20160406.19

Copy | Download

ACS Style

Chen Hong; He Yong; Pan Xuchao; Shen Jie; He Xun. Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process. Sci. Discov. 2016, 4(6), 398-404. doi: 10.11648/j.sd.20160406.19

Copy | Download

AMA Style

Chen Hong, He Yong, Pan Xuchao, Shen Jie, He Xun. Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process. Sci Discov. 2016;4(6):398-404. doi: 10.11648/j.sd.20160406.19

Copy | Download

@article{10.11648/j.sd.20160406.19,
  author = {Chen Hong and He Yong and Pan Xuchao and Shen Jie and He Xun},
  title = {Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process},
  journal = {Science Discovery},
  volume = {4},
  number = {6},
  pages = {398-404},
  doi = {10.11648/j.sd.20160406.19},
  url = {https://doi.org/10.11648/j.sd.20160406.19},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20160406.19},
  abstract = {Explosions of explosives can produce electromagnetic radiation signals. Based on the theory of the explosion of electromagnetic radiation, the effects of metal additives on the electromagnetic radiation produced by explosive detonation should be researched. In this paper, the electromagnetic radiation signal characteristic produced by the passivation RDX of metal additives explosion were studied by experimental. The rod-shaped antenna measurement system was used to measure the electromagnetic radiation signals generated by the different percentages of aluminum-containing passivation RDX and pure passivation RDX. The results show that the intensity of the electromagnetic radiation signal produced by the explosion is obviously increased by mixing aluminum. In the case of the same explosive mass, the signal intensity of the electromagnetic radiation generated by the explosion increases with the aluminum mass percentage is increased. When the content of aluminum is the same，with the increase of the mass of explosives，the intensity of the electromagnetic radiation signal generated by explosion also increases. The main component of the electromagnetic radiation signal frequency generated by explosives is less than 1MHz，the electromagnetic spectrum generated by explosives with the same composition is consistent.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process
AU  - Chen Hong
AU  - He Yong
AU  - Pan Xuchao
AU  - Shen Jie
AU  - He Xun
Y1  - 2016/12/07
PY  - 2016
N1  - https://doi.org/10.11648/j.sd.20160406.19
DO  - 10.11648/j.sd.20160406.19
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 398
EP  - 404
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20160406.19
AB  - Explosions of explosives can produce electromagnetic radiation signals. Based on the theory of the explosion of electromagnetic radiation, the effects of metal additives on the electromagnetic radiation produced by explosive detonation should be researched. In this paper, the electromagnetic radiation signal characteristic produced by the passivation RDX of metal additives explosion were studied by experimental. The rod-shaped antenna measurement system was used to measure the electromagnetic radiation signals generated by the different percentages of aluminum-containing passivation RDX and pure passivation RDX. The results show that the intensity of the electromagnetic radiation signal produced by the explosion is obviously increased by mixing aluminum. In the case of the same explosive mass, the signal intensity of the electromagnetic radiation generated by the explosion increases with the aluminum mass percentage is increased. When the content of aluminum is the same，with the increase of the mass of explosives，the intensity of the electromagnetic radiation signal generated by explosion also increases. The main component of the electromagnetic radiation signal frequency generated by explosives is less than 1MHz，the electromagnetic spectrum generated by explosives with the same composition is consistent.
VL  - 4
IS  - 6
ER  -

Copy | Download

Author Information

Chen Hong

Ministerial key Laboratory of ZNDY, Nanjing University of Science and Technology, Nanjing, China
He Yong

Ministerial key Laboratory of ZNDY, Nanjing University of Science and Technology, Nanjing, China
Pan Xuchao

Ministerial key Laboratory of ZNDY, Nanjing University of Science and Technology, Nanjing, China
Shen Jie

Ministerial key Laboratory of ZNDY, Nanjing University of Science and Technology, Nanjing, China
He Xun

Ministerial key Laboratory of ZNDY, Nanjing University of Science and Technology, Nanjing, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Chen Hong, He Yong, Pan Xuchao, Shen Jie, He Xun. (2016). Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process. Science Discovery, 4(6), 398-404. https://doi.org/10.11648/j.sd.20160406.19

Copy | Download

ACS Style

Chen Hong; He Yong; Pan Xuchao; Shen Jie; He Xun. Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process. Sci. Discov. 2016, 4(6), 398-404. doi: 10.11648/j.sd.20160406.19

Copy | Download

AMA Style

Chen Hong, He Yong, Pan Xuchao, Shen Jie, He Xun. Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process. Sci Discov. 2016;4(6):398-404. doi: 10.11648/j.sd.20160406.19

Copy | Download

@article{10.11648/j.sd.20160406.19,
  author = {Chen Hong and He Yong and Pan Xuchao and Shen Jie and He Xun},
  title = {Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process},
  journal = {Science Discovery},
  volume = {4},
  number = {6},
  pages = {398-404},
  doi = {10.11648/j.sd.20160406.19},
  url = {https://doi.org/10.11648/j.sd.20160406.19},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sd.20160406.19},
  abstract = {Explosions of explosives can produce electromagnetic radiation signals. Based on the theory of the explosion of electromagnetic radiation, the effects of metal additives on the electromagnetic radiation produced by explosive detonation should be researched. In this paper, the electromagnetic radiation signal characteristic produced by the passivation RDX of metal additives explosion were studied by experimental. The rod-shaped antenna measurement system was used to measure the electromagnetic radiation signals generated by the different percentages of aluminum-containing passivation RDX and pure passivation RDX. The results show that the intensity of the electromagnetic radiation signal produced by the explosion is obviously increased by mixing aluminum. In the case of the same explosive mass, the signal intensity of the electromagnetic radiation generated by the explosion increases with the aluminum mass percentage is increased. When the content of aluminum is the same，with the increase of the mass of explosives，the intensity of the electromagnetic radiation signal generated by explosion also increases. The main component of the electromagnetic radiation signal frequency generated by explosives is less than 1MHz，the electromagnetic spectrum generated by explosives with the same composition is consistent.},
 year = {2016}
}

Copy | Download

TY  - JOUR
T1  - Experimental Research on the Effect of Aluminum Additive on the Electromagnetic Radiation in Detonation Process
AU  - Chen Hong
AU  - He Yong
AU  - Pan Xuchao
AU  - Shen Jie
AU  - He Xun
Y1  - 2016/12/07
PY  - 2016
N1  - https://doi.org/10.11648/j.sd.20160406.19
DO  - 10.11648/j.sd.20160406.19
T2  - Science Discovery
JF  - Science Discovery
JO  - Science Discovery
SP  - 398
EP  - 404
PB  - Science Publishing Group
SN  - 2331-0650
UR  - https://doi.org/10.11648/j.sd.20160406.19
AB  - Explosions of explosives can produce electromagnetic radiation signals. Based on the theory of the explosion of electromagnetic radiation, the effects of metal additives on the electromagnetic radiation produced by explosive detonation should be researched. In this paper, the electromagnetic radiation signal characteristic produced by the passivation RDX of metal additives explosion were studied by experimental. The rod-shaped antenna measurement system was used to measure the electromagnetic radiation signals generated by the different percentages of aluminum-containing passivation RDX and pure passivation RDX. The results show that the intensity of the electromagnetic radiation signal produced by the explosion is obviously increased by mixing aluminum. In the case of the same explosive mass, the signal intensity of the electromagnetic radiation generated by the explosion increases with the aluminum mass percentage is increased. When the content of aluminum is the same，with the increase of the mass of explosives，the intensity of the electromagnetic radiation signal generated by explosion also increases. The main component of the electromagnetic radiation signal frequency generated by explosives is less than 1MHz，the electromagnetic spectrum generated by explosives with the same composition is consistent.
VL  - 4
IS  - 6
ER  -

Copy | Download