The Application of Current Requirement Test in Large Oil Field Station

Zhou Bing; Han Wen-li; Zhang Ying-ying; Guo Ji-yin; Zhao Yu-fei; Zhang Yan-jun

doi:doi:10.11648/j.sjc.20170503.13

| Peer-Reviewed

The Application of Current Requirement Test in Large Oil Field Station

Zhou Bing, Han Wen-li, Zhang Ying-ying, Guo Ji-yin, Zhao Yu-fei, Zhang Yan-jun

Published in Science Journal of Chemistry (Volume 5, Issue 3)

Received: 7 August 2017 Published: 7 August 2017

Views: Downloads:

Download PDF

Share This Article

Twitter
Linked In
Facebook

Abstract

Up till now, the local cathodic protection renewal of oil & gas field station can be only designed based on previous experience. Therefore, it may lead to some facilities out of protection and inhomogeneous distribution of potential. What is worse is that it can cause mutual interference with surrounding systems, resulting in the malfunction of the cathodic protection system. Through the current requirement test, the current density for the effective protection of storage tanks and pipelines can be obtained. Besides, the type and distribution of the anode ground bed can also be optimized. Thanks to the above calculation and optimization, the protection efficiency of the cathodic protection system can be significantly improved. In this paper, on-site current requirement test was conducted in a large oil field station. The simulation of the cathodic protection system was conducted in certain area separately so as to confirm the minimum current density value required for the effective cathodic protection and the potential distribution in certain area, all of which would benefit the redesign and renewal of the local cathodic protection system in the reservoir area.

Published in	Science Journal of Chemistry (Volume 5, Issue 3)
DOI	10.11648/j.sjc.20170503.13
Page(s)	42-46
Creative Commons	This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.
Copyright	Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Large Oil Field Station, Current Requirement Test, Regional Cathodic Protection, Protection Current Density

References

[1]	Tang Zhao-lin, Zhang Xue-you, LIU gang. Simulated Feeding Test of Impressed Current Catholic Protection for a Natural Gas Pipelin [J]. Corrosion＆Protection, 2013, 34 (2): 161-163.
[2]	Wang Jiang-feng, Li Hong-qi. Gas pipeline cathodic protection problem and managemen t [J]. Corrosion＆Protection, 2014 (7): 758-760.
[3]	Ge Ai-tian, TU Ming-yue. Practice of Regional Cathodic Protection in Shaanjing Pipeline [J]. Corrosion＆Protection, 2009 (5): 343-345.
[4]	Han Fei. Application of Current Requirement Test to Mitigation of DC Transit Stray Current Interference [J]. Corrosion＆Protection, 2015 (11): 1101-1103, 1108.
[5]	Wu Guang-chun, Du Yan-xia, Lu Min-xu, Jiang Zi-tao, Tang De-zhi. Status in Research on Effect of Grounding System on Regional Cathodic Protection and Solution [J]. Co, rrosion＆Protection, 2014 (11): 1065-1068, 1097.
[6]	Long Tian-hui, Niu Shuang-hui. Determination of Protective Current Density of Pipeline in a Thermal Plant [J]. Corrosion＆Protection, 2012 (12): 1121-1122.
[7]	Wang Zai-feng, Song Ji-wen, Chen Sheng-li, Sun Hu-yuan. Finite Element Simulation of Cathodic Protection Field and Potential Scanning System [J]. Total Corrosion Control, 2015 (12): 23-27.
[8]	Zhang Ming-di, Li Hong-xi, Gao Hong-lei, Wan Fang-lin. Determination of cathodic protection current density for buried old pipelines [J]. Corrosion science and protection technology, 1996 (03).
[9]	Yang Yong, He Jun, Li Ya-jun, Liu Jian. Selection of Electric Current Intensity for Cathodic Protection of Buried Steel Pipelines [J]. Corrosion & Protection in Petrochemical Industry, 2009 26 (5).
[10]	Shen Guang-ji, Gu Ying-cui, Xue Zhi-yuan, Zhao Jun, Su Lei. Discussion on Test Methods of Cathodic Protection Current Densit [J]. Total Corrosion Control, 2012:26 (6).

Cite This Article

Plain Text BibTeX RIS

APA Style

Zhou Bing, Han Wen-li, Zhang Ying-ying, Guo Ji-yin, Zhao Yu-fei, et al. (2017). The Application of Current Requirement Test in Large Oil Field Station. Science Journal of Chemistry, 5(3), 42-46. https://doi.org/10.11648/j.sjc.20170503.13

Copy | Download

ACS Style

Zhou Bing; Han Wen-li; Zhang Ying-ying; Guo Ji-yin; Zhao Yu-fei, et al. The Application of Current Requirement Test in Large Oil Field Station. Sci. J. Chem. 2017, 5(3), 42-46. doi: 10.11648/j.sjc.20170503.13

Copy | Download

AMA Style

Zhou Bing, Han Wen-li, Zhang Ying-ying, Guo Ji-yin, Zhao Yu-fei, et al. The Application of Current Requirement Test in Large Oil Field Station. Sci J Chem. 2017;5(3):42-46. doi: 10.11648/j.sjc.20170503.13

Copy | Download

@article{10.11648/j.sjc.20170503.13,
  author = {Zhou Bing and Han Wen-li and Zhang Ying-ying and Guo Ji-yin and Zhao Yu-fei and Zhang Yan-jun},
  title = {The Application of Current Requirement Test in Large Oil Field Station},
  journal = {Science Journal of Chemistry},
  volume = {5},
  number = {3},
  pages = {42-46},
  doi = {10.11648/j.sjc.20170503.13},
  url = {https://doi.org/10.11648/j.sjc.20170503.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20170503.13},
  abstract = {Up till now, the local cathodic protection renewal of oil & gas field station can be only designed based on previous experience. Therefore, it may lead to some facilities out of protection and inhomogeneous distribution of potential. What is worse is that it can cause mutual interference with surrounding systems, resulting in the malfunction of the cathodic protection system. Through the current requirement test, the current density for the effective protection of storage tanks and pipelines can be obtained. Besides, the type and distribution of the anode ground bed can also be optimized. Thanks to the above calculation and optimization, the protection efficiency of the cathodic protection system can be significantly improved. In this paper, on-site current requirement test was conducted in a large oil field station. The simulation of the cathodic protection system was conducted in certain area separately so as to confirm the minimum current density value required for the effective cathodic protection and the potential distribution in certain area, all of which would benefit the redesign and renewal of the local cathodic protection system in the reservoir area.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - The Application of Current Requirement Test in Large Oil Field Station
AU  - Zhou Bing
AU  - Han Wen-li
AU  - Zhang Ying-ying
AU  - Guo Ji-yin
AU  - Zhao Yu-fei
AU  - Zhang Yan-jun
Y1  - 2017/08/07
PY  - 2017
N1  - https://doi.org/10.11648/j.sjc.20170503.13
DO  - 10.11648/j.sjc.20170503.13
T2  - Science Journal of Chemistry
JF  - Science Journal of Chemistry
JO  - Science Journal of Chemistry
SP  - 42
EP  - 46
PB  - Science Publishing Group
SN  - 2330-099X
UR  - https://doi.org/10.11648/j.sjc.20170503.13
AB  - Up till now, the local cathodic protection renewal of oil & gas field station can be only designed based on previous experience. Therefore, it may lead to some facilities out of protection and inhomogeneous distribution of potential. What is worse is that it can cause mutual interference with surrounding systems, resulting in the malfunction of the cathodic protection system. Through the current requirement test, the current density for the effective protection of storage tanks and pipelines can be obtained. Besides, the type and distribution of the anode ground bed can also be optimized. Thanks to the above calculation and optimization, the protection efficiency of the cathodic protection system can be significantly improved. In this paper, on-site current requirement test was conducted in a large oil field station. The simulation of the cathodic protection system was conducted in certain area separately so as to confirm the minimum current density value required for the effective cathodic protection and the potential distribution in certain area, all of which would benefit the redesign and renewal of the local cathodic protection system in the reservoir area.
VL  - 5
IS  - 3
ER  -

Copy | Download

Author Information

Zhou Bing

CNPC Research Institute of Engineering Technology, Tianjin, China
Han Wen-li

CNPC Research Institute of Engineering Technology, Tianjin, China
Zhang Ying-ying

CNPC Research Institute of Engineering Technology, Tianjin, China
Guo Ji-yin

CNPC Research Institute of Engineering Technology, Tianjin, China
Zhao Yu-fei

CNPC Research Institute of Engineering Technology, Tianjin, China
Zhang Yan-jun

CNPC Research Institute of Engineering Technology, Tianjin, China

Download PDF

Sections

Plain Text BibTeX RIS

APA Style

Zhou Bing, Han Wen-li, Zhang Ying-ying, Guo Ji-yin, Zhao Yu-fei, et al. (2017). The Application of Current Requirement Test in Large Oil Field Station. Science Journal of Chemistry, 5(3), 42-46. https://doi.org/10.11648/j.sjc.20170503.13

Copy | Download

ACS Style

Zhou Bing; Han Wen-li; Zhang Ying-ying; Guo Ji-yin; Zhao Yu-fei, et al. The Application of Current Requirement Test in Large Oil Field Station. Sci. J. Chem. 2017, 5(3), 42-46. doi: 10.11648/j.sjc.20170503.13

Copy | Download

AMA Style

Zhou Bing, Han Wen-li, Zhang Ying-ying, Guo Ji-yin, Zhao Yu-fei, et al. The Application of Current Requirement Test in Large Oil Field Station. Sci J Chem. 2017;5(3):42-46. doi: 10.11648/j.sjc.20170503.13

Copy | Download

@article{10.11648/j.sjc.20170503.13,
  author = {Zhou Bing and Han Wen-li and Zhang Ying-ying and Guo Ji-yin and Zhao Yu-fei and Zhang Yan-jun},
  title = {The Application of Current Requirement Test in Large Oil Field Station},
  journal = {Science Journal of Chemistry},
  volume = {5},
  number = {3},
  pages = {42-46},
  doi = {10.11648/j.sjc.20170503.13},
  url = {https://doi.org/10.11648/j.sjc.20170503.13},
  eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjc.20170503.13},
  abstract = {Up till now, the local cathodic protection renewal of oil & gas field station can be only designed based on previous experience. Therefore, it may lead to some facilities out of protection and inhomogeneous distribution of potential. What is worse is that it can cause mutual interference with surrounding systems, resulting in the malfunction of the cathodic protection system. Through the current requirement test, the current density for the effective protection of storage tanks and pipelines can be obtained. Besides, the type and distribution of the anode ground bed can also be optimized. Thanks to the above calculation and optimization, the protection efficiency of the cathodic protection system can be significantly improved. In this paper, on-site current requirement test was conducted in a large oil field station. The simulation of the cathodic protection system was conducted in certain area separately so as to confirm the minimum current density value required for the effective cathodic protection and the potential distribution in certain area, all of which would benefit the redesign and renewal of the local cathodic protection system in the reservoir area.},
 year = {2017}
}

Copy | Download

TY  - JOUR
T1  - The Application of Current Requirement Test in Large Oil Field Station
AU  - Zhou Bing
AU  - Han Wen-li
AU  - Zhang Ying-ying
AU  - Guo Ji-yin
AU  - Zhao Yu-fei
AU  - Zhang Yan-jun
Y1  - 2017/08/07
PY  - 2017
N1  - https://doi.org/10.11648/j.sjc.20170503.13
DO  - 10.11648/j.sjc.20170503.13
T2  - Science Journal of Chemistry
JF  - Science Journal of Chemistry
JO  - Science Journal of Chemistry
SP  - 42
EP  - 46
PB  - Science Publishing Group
SN  - 2330-099X
UR  - https://doi.org/10.11648/j.sjc.20170503.13
AB  - Up till now, the local cathodic protection renewal of oil & gas field station can be only designed based on previous experience. Therefore, it may lead to some facilities out of protection and inhomogeneous distribution of potential. What is worse is that it can cause mutual interference with surrounding systems, resulting in the malfunction of the cathodic protection system. Through the current requirement test, the current density for the effective protection of storage tanks and pipelines can be obtained. Besides, the type and distribution of the anode ground bed can also be optimized. Thanks to the above calculation and optimization, the protection efficiency of the cathodic protection system can be significantly improved. In this paper, on-site current requirement test was conducted in a large oil field station. The simulation of the cathodic protection system was conducted in certain area separately so as to confirm the minimum current density value required for the effective cathodic protection and the potential distribution in certain area, all of which would benefit the redesign and renewal of the local cathodic protection system in the reservoir area.
VL  - 5
IS  - 3
ER  -

Copy | Download